Бренды
Filter unit with inline filter ABUFG
Filter unit with inline filter ABUFG
-
Component series 1X
-
Electric motor frame size 90S … 132S
-
Maximum operating pressure 10 bar
-
With gerotor pump or external gear pump
-
With low-pressure inline filter
- Compact unit with pump and installed low-pressure filter
- Modular design
Line connections |
Oil side |
Connection thread according to ISO 1179, pipe connections according to DIN 2353/ISO 8434, flanges according to ISO 6162 | |||||||||
Hydraulic fluids 1) |
Mineral oil HLP46 according to DIN 51524, part 2 | ||||||||||
Hydraulic fluid temperature range 2) |
°C |
25 … 80 | |||||||||
Adm. operating pressures at input (absolute) |
Oil side |
Gerotor pump |
bar |
0,7 ... 2 | |||||||
External gear pump SILENCE PLUS |
bar |
0,7 ... 3 | |||||||||
pmax |
bar |
10 | |||||||||
Motor voltage/frequency |
50 Hz |
V |
230 400 |
||||||||
Pump rotation |
Right | ||||||||||
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 3) |
At least cleanliness class 20/18/15 must be achieved. | ||||||||||
Filter rating 4) |
µm |
1 3 10 |
|||||||||
Surface treatment |
By default, all steel components and components are at least provided with temporary corrosion protection (e.g. for transport). |
The operating filtration in the bypass is common method to keep the hydraulic fluid at a certain level of cleanliness. The combination of pump and appropriately rated filter circulates the oil independent from the overall system under constant conditions and unloads the filters in the main flow of the system in this way.
These bypass filters also operate when no oil is transported in the main system.