Бренды
Motor-pump groups - IE2, for continuous operation S1 ABHPG-GZ
Motor-pump groups - IE2, for continuous operation S1 ABHPG-GZ
-
Pump type PGZ
-
Electric motor frame size 90S … 132M
-
Maximum pressure 15 bar
-
Maximum flow 186 l/min
- For hydrostatic drives in the open circuit
- Electric motor design IM B5 (ABHPG)
- Pump fastened at the electric motor with rigid pump carrier and coupling
- Low operating noise
- Versatile possible applications on tank, base frame or separate installation
- Clear, maintenance-friendly set-up
- With gerotor pump PGZ (displacement pump)
|
Line connections |
see table Line connections | ||||||||||||||||||||||||||
|
Hydraulic fluid 1) |
Mineral oil HLP according to DIN 51524; part 2 e.g. with operating temperature 50 °C ISO VG46 DIN ISO 3448 |
||||||||||||||||||||||||||
|
Pump type |
|
PGZ according to data sheet 10545 | |||||||||||||||||||||||||
|
Direction of rotation |
Right | ||||||||||||||||||||||||||
|
Operating pressure, absolute |
Inlet 2) |
pmin-max |
bar |
0,7 ... 2 | |||||||||||||||||||||||
|
Outlet |
pnom |
bar |
15 | ||||||||||||||||||||||||
|
Hydraulic fluid temperature range, observe viscosity range 3) |
|
ϑ |
°C |
+20 … +80 | |||||||||||||||||||||||
|
Toptimal with HLP 46 (DIN 51524) |
ϑ |
°C |
+40 … +50 | ||||||||||||||||||||||||
|
Tmax in continuous operation |
ϑ |
°C |
+ 65 | ||||||||||||||||||||||||
|
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 4) |
At least cleanliness class 21/18/15 | ||||||||||||||||||||||||||
|
Viscosity range 5) |
v |
mm²/s |
10 … 2.000 | ||||||||||||||||||||||||
|
Electric motor |
Motor type |
Three-phase asynchronous motor | |||||||||||||||||||||||||
|
Efficiency class |
IE2 | ||||||||||||||||||||||||||
|
Number of pole pairs |
4 | ||||||||||||||||||||||||||
|
Voltage according to IEC 38 |
U |
at 50 Hz (CA) |
V |
230 400 |
|||||||||||||||||||||||
|
at 50 Hz (CB) |
V |
400 690 |
|||||||||||||||||||||||||
|
Speed |
n |
at 50 Hz |
rpm |
1450 | |||||||||||||||||||||||
|
Protection class |
IP55 | ||||||||||||||||||||||||||
|
Installation position |
horizontal | ||||||||||||||||||||||||||
|
Surface treatment |
By default, all steel components and components are at least provided with temporary corrosion protection (e.g. for transport). | ||||||||||||||||||||||||||