Бренды
Motor-pump groups - IE3, for continuous operation S1 ABAPG-A10VSO...VP ABHPG-A10VSO...VP
Motor-pump groups - IE3, for continuous operation S1 ABAPG-A10VSO...VP ABHPG-A10VSO...VP
-
Pump type A10VSO
-
Electric motor frame size 100L … 315S
-
Series 52: Size 10
-
Series 31: Size 18 … 140
-
Efficiency class IE3 according to IEC 60034-30
- For hydrostatic drives in the open circuit
- Electric motor design IM B5 (ABHPG) or IM B3/B5 (ABAPG)
- Pump fastened at the electric motor with rigid pump carrier and coupling
- Low operating noise
- Versatile possible applications on tank, base frame or separate installation
- Clear, maintenance-friendly set-up
- With axial piston pump A10VSO (variable displacement pump)
- Adjustment DFR1 (pressure/flow controller) and DFLR (pressure/flow power controller)
|
Line connections |
see table Line connections | |||||
|
Hydraulic fluid 1) |
Mineral oil HLP according to DIN 51524; part 2 e.g. with operating temperature 50 °C ISO VG46 DIN ISO 3448 |
|||||
|
Pump type |
|
A10VSO10 series 52 according to data sheet 92703 A10VSO18-140 series 31 according to data sheet 92711 |
||||
|
Direction of rotation |
Right | |||||
|
Operating pressure, absolute |
Inlet |
pmin-max |
bar |
0,8 ... 10 | ||
|
Outlet |
pnom |
bar |
280 | |||
|
bar |
250 2) | |||||
|
Peak pressure |
pmax |
bar |
350 | |||
|
bar |
315 2) | |||||
|
Leakage port |
pmax |
bar |
2 | |||
|
Hydraulic fluid temperature range, observe viscosity range 3) |
|
ϑ |
°C |
-25 … +90 | ||
|
Toptimal with HLP 46 (DIN 51524) |
ϑ |
°C |
+45 … +55 | |||
|
Tmax in continuous operation |
ϑ |
°C |
+ 65 | |||
|
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 4) |
At least cleanliness class 20/18/15 must be achieved. | |||||
|
Viscosity range |
Ideal |
v |
mm²/s |
16 … 36 | ||
|
short-term |
v |
mm²/s |
10 … 1.000 | |||
|
Electric motor |
Motor type |
Three-phase asynchronous motor | ||||
|
Efficiency class |
IE3, IEC 60034-30 | |||||
|
Number of pole pairs |
4 | |||||
|
Voltage according to IEC 38 |
U |
at 50 Hz (CA) to 3 kW |
V |
230 400 |
||
|
at 50 Hz (CB) from 4 kW |
V |
400 690 |
||||
|
Speed |
n |
at 50 Hz |
rpm |
1450 | ||
|
Protection class |
IP55 | |||||
|
Installation position |
horizontal | |||||
|
Surface treatment |
By default, all steel components and components are at least provided with temporary corrosion protection (e.g. for transport). | |||||