Бренды
Motor-pump groups - IE3, for continuous operation S1 ABAPG-V7 ABHPG-V7
Motor-pump groups - IE3, for continuous operation S1 ABAPG-V7 ABHPG-V7
-
Pump type PV7
-
Maximum operating pressure 160 bar
-
Maximum flow 162.5 l/min
-
Electric motor frame size 90S … 250M
-
Efficiency class IE3 according to IEC 60034-30
- For hydrostatic drives in the open circuit
- Electric motor design IM B5 (ABHPG) or IM B3/B5 (ABAPG)
- Pump fastened at the electric motor with rigid pump carrier and coupling
- Low operating noise
- Versatile possible applications on tank, base frame or separate installation
- Clear, maintenance-friendly set-up
- With vane pump PV7 (variable displacement pump)
Line connections |
see table Line connections | |||||
Hydraulic fluid 1) |
Mineral oil HLP according to DIN 51524; part 2 e.g. with operating temperature 50 °C ISO VG46 DIN ISO 3448 |
|||||
Pump type |
|
PV7 frame size 6 according to data sheet 10522 PV7 frame size 10-100 according to data sheet 10515 |
||||
Direction of rotation |
Right | |||||
Operating pressure, absolute |
Inlet |
pmin-max |
bar |
0,8 ... 2,5 | ||
Outlet 2) |
pnom |
bar |
160 | |||
Leakage port |
pmax |
bar |
2 | |||
Hydraulic fluid temperature range, observe viscosity range 3) |
|
ϑ |
°C |
-10 … +70 | ||
Toptimal with HLP 46 (DIN 51524) |
ϑ |
°C |
+45 … +55 | |||
Tmax in continuous operation |
ϑ |
°C |
+ 65 | |||
Maximum admissible degree of contamination of the hydraulic fluid, cleanliness class according to ISO 4406 (c) 4) |
|
At least cleanliness class 19/16/13 with NG10 to 25 and/or cleanliness class 20/18/15 with NG14 to NG150 | ||||
Viscosity range |
Ideal |
v |
mm²/s |
16 … 160 | ||
in case of start-up in zero stroke operation |
v |
mm²/s |
<200 | |||
in case of start-up in delivery operation 5) |
v |
mm²/s |
<800 | |||
Electric motor |
Motor type |
Three-phase asynchronous motor | ||||
Efficiency class |
IE3, IEC 60034-30 | |||||
Number of pole pairs |
4 | |||||
Voltage according to IEC 38 |
U |
at 50 Hz (CA) to 3 kW |
V |
230 400 |
||
at 50 Hz (CB) from 4 kW |
V |
400 690 |
||||
Speed |
n |
at 50 Hz |
rpm |
1450 | ||
Protection class |
IP55 | |||||
Installation position |
horizontal | |||||
Surface treatment |
By default, all steel components and components are at least provided with temporary corrosion protection (e.g. for transport). |