Бренды
Double tank mounted return line filter with filter element according to DIN 24550 10 TD(N)
Double tank mounted return line filter with filter element according to DIN 24550 10 TD(N)
-
Size 0040 … 2500
-
Component series 1X
-
Max. operating pressure 10 bar
-
Flow, max. 1680 l/min
-
Port G1 1/2, G1 1/2, SAE 2 1/2", 3000 psi, SAE 2 1/2", 3000 psi, SAE 2 1/2", 3000 psi, SAE 2 1/2", 3000 psi, SAE 2 1/2", 3000 psi
-
Operating temperature -10 … +100 °C
- Filter für Tankanbau, umschaltbar
- Special highly efficient filter media
- Filtration of very fine particles and high dirt holding capacity across a broad pressure differential range
- High collapse resistance of the filter elements
- Standard version equipped with mechanical/visual maintenance indicator with memory function
- Optional equipment with various electrical switching elements, modular design
- Standardmäßige Filterausstattung mit einem Bypassventil im Filtergehäuse integriert
- Optional measuring port
|
Type / version |
10 TDN | 10 TDN | 10 TDN | 10 TDN | 10 TDN | 10 TDN | 10 TDN | 10 TDN | 10 TD | 10 TD | ||
|
Size |
0040 | 0063 | 0100 | 0160 | 0250 | 0400 | 0630 | 1000 | 2000 | 2500 | ||
|
Component series |
1X | |||||||||||
|
Port |
Standard |
G1 1/2 | SAE 2 1/2", 3000 psi | |||||||||
|
optional |
SAE 16" | G 1 1/4, SAE 24" | ||||||||||
|
Ambient temperature range |
-10 … +65 °C | |||||||||||
|
Installation position |
Vertical | |||||||||||
|
Filtration direction |
From the outside to the inside | |||||||||||
|
Fatigue strength according to ISO 10771 |
> 10⁵ with max. operating pressure | |||||||||||
|
Material |
Filter cover |
carbon fiber reinforced plastic | Aluminium | |||||||||
|
Filter head |
Aluminium | |||||||||||
|
Filter bowl |
carbon fiber reinforced plastic | Steel, aluminized | ||||||||||
|
Seals |
NBR / FKM | |||||||||||
|
Weight |
4.46 kg | 4.86 kg | 5.26 kg | 14 kg | 15 kg | 23 kg | 27 kg | 61 kg | 68 kg | 79 kg | ||
The switchable tank mounted return line filter is provided in the return line for direct attachment onto the tank of a hydraulic or lubrication system. It can also be used as filling or bypass filter. The filter basically consists of filter head (1) and switch-over fitting (2), filter bowl (3), cover (4), filter element (5) as well as a bypass valve (6), by default
Optionally, the filter is equipped with mechanical/visual maintenance indicator (7). The electronic maintenance indicator is connected via the electronic switching elements (8) with 1 or 2 switching points (see p. 5), which have to be ordered separately. For every filter housing, a switching element is required. The electronic switching element (8) is attached to the mechanical/visual maintenance indicator (7) and held by means of a locking ring.
Depending on the filter size, more additional functions are available - e.g. a breathing filter, surge protection (only for NG0040 - 0100) or outlet pipes in different lengths – in this connection, also refer to the chapter “Accessories”.
During operation, the hydraulic fluid reaches the filter housing via the inlet; here, it flows through the filter element (5) from the outside to the inside and is cleaned according to the filter rating. The dirt particles filtered out settle in the filter element (5). Via the outlet, the filtered hydraulic fluid enters the tank. In case of contamination, the necessary filter element exchange is displayed by the relevant maintenance indicator (7). Within the course of this exchange, you should also exchange the breathing filter element (only with NG0040-0100).
To this end, the system is manually switched to the clean filter element by means of the switch-over fitting (2). Permanent flow is guaranteed during the switching process.