Бренды
4/3 proportional directional valves with integrated digital electronics and field bus interface (IFB-P) 4WREF
4/3 proportional directional valves with integrated digital electronics and field bus interface (IFB-P) 4WREF
-
Size 6, 10
-
Component series 2X
-
Maximum operating pressure 315 bar
-
Maximum flow 180 l/min
- Direct operated proportional directional valve with integrated digital electronics and field bus interface (Integrated Field Bus IFB-P)
- Operation by means of proportional solenoids with central thread and detachable coil
- Valve control spool, position-controlled
- Analog interface for command and actual value
- Command value (flow), analog or via bus
- Design for CAN bus with CANopen protocol DS 408 or Profibus-DP
- Quick commissioning via PC and WIN-PED 6 commissioning software
Type |
4WREF | |||
Size |
6 | 10 | ||
Installation position |
any, preferably horizontal | |||
Ambient temperature range |
°C |
-20 … +50 | ||
Storage temperature range |
°C |
-20 … +80 | ||
Weight |
without sandwich plate |
kg |
2.4 | 6.5 |
Climate |
Environmental audit according to EN 60068-2 | |||
MTTFd values according to EN ISO 13849 |
y |
150 |
Set-up:
The valve basically consists of:
Functional description
With de-energized solenoids (5 and 6), the control spool (2) is brought into the central position by compression springs (3 and 4) between the spring plates (8 and 9) (with V control spool without spring plate). With V control spools, the mechanical zero position does not correspond to the hydraulic one.
Functions:
The integrated digital electronics enables the following error detection:
The following additional functions are available:
WIN-PED PC program (version 6 or higher):
To implement the project planning task and to parameterize the IFB-P valves, the user may use the WIN-PED commissioning software.
System requirements
Notice
The "WIN-PED" PC program is not included in the scope of delivery. It is available for free download!
Important notice:
The PG fitting (13) must not be opened. Mechanical adjustment of the adjustment nut located below is prohibited and damages the valve!