Бренды
Constant pressure systems Sytronix FcP 5020
Constant pressure systems Sytronix FcP 5020
-
Preferred system for power output from 0.25 to 18.5 kW.
Apart from that, FcP can be used if DRn cannot be used, e.g. for noise reasons.
-
Particularly low operating noise thanks to the use of internal gear pumps.
-
Apart from the Sytronix functionality, FcP 5020 on the basis of the frequency converter EFC 5610 offers monitoring of the sensors at the power unit.
-
1-quadrant operation
-
Integrated pump guard function
Apart from that, FcP can be used if DRn cannot be used, e.g. for noise reasons.
- Very low noise level
- Standard dynamics
-
Pump guard function
A unique pump guard function has been integrated in all FcP systems extending the life cycle and preventing machine standstill -
Multi-Ethernet
Support of standard communication protocols provides flexibility for the integration into a multitude of system topologies
FcP systems are designed for constant pressure systems and distinguish themselves by a very low noise level. Application examples include machine tools and small power units up to 18.5 kW. With special noise requirements or requirements such as HFC, the use of FcP is also reasonable at a higher performance range up to approx. 90 kW.
Components
Pre-configured motor-pump combinations consisting of
▪
MOT-FC motor, forced- or self-ventilated
‐
Pump of type PGF or PGH
‐
Standard coupling elements
‐
Frequency converter EFC 5610
▪
Important differences to FcP 5010
Removable terminals for cables 1 mm2
▪
Parameterization and firmware download with Mini-USB via our commissioning software IndraWorks or ConverterWorks
▪
Safety technology STO (Safe Torque Off) contained by default as of 30 kW, up to 22 kW upon request
▪
Applications
Suitable for use in open hydraulic circuits for central pressure supply in power units with multiple axes: i.e. constant pressure systems. FcP is an energy-saving solution and can reduce hydraulic energy consumption by 30 to 70%, depending on the duty cycle. Typically a smaller displacement pump can be used and cooling requirements are reduced for the same hydraulic performance.
▪
In constant pressure systems as of approx. 18.5 kW, DRn 7020 is recommended. In case of requirements such as a particularly low-noise power unit, the use of FcP may also be reasonable with higher outputs.