Бренды
Oil/air cooler KOL, KOLP
Oil/air cooler KOL, KOLP
-
Component series 2X
-
Maximum flow 400 l/min
- Environmentally friendly as no exchange of water with hydraulic fluid possible
- Compact design
- Wide field of application
- Large number of variants
- Ready for connection
|
Direction of rotation (fan wheel) |
Left | |||||
|
Installation position |
horizontal and vertical |
|||||
The oil/air cooler is used for heat dissipation.
Pressure drops in lines and devices release energy in the hydraulic system in the form of heat. This heat is dissipated from the hydraulic system into the ambient air by means of the oil/air cooler. In this way, the hydraulic fluid temperature range can be kept in the perfect temperature range for the hydraulic components.
The oil/air cooler basically consists of electric motor, housing, cooler element and fan wheel. In the design with radial fan wheel, the oil/air cooler is also available as complete circulation circuit (attached external gear pump with or without filter).
The installation position is horizontal or vertical. For horizontal installation position of the oil/air coolers, four long holes are integrated in the mounting bars. For the vertical installation position, the long holes for mounting are located at the cooler element. See unit dimensions.
Optionally, filters are available with electric or optical maintenance indicator.
If the oil/air coolers are used in heavily polluted environment, we recommend using the oil/air cooler with air filter mat.